Information
3.3.3
Settings
Numerical settings
747.431 | Z08 | 2014-01-31
The menu item Information contains the following submenu
items.
n
Contact info
System info (see Fig. left):
n
–
Product designation
–
Serial number of the inverter
–
Information on the software and hardware versions of the
inverter (see example ① in Fig. left)
–
Inverter address
–
Version of the operating instructions for the inverter
Country setting: Country that is currently set and country-
n
specific grid parameters; see also
React. pwr. char. curve: Reactive power characteristic
n
curve graph (only when prescribed for currently set country)
Network: Network parameters, partially configurable under
n
Settings ▶ Network
–
DHCP status: DHCP on/off
–
Link status: Network connection state
–
IP address: IP address of the inverter
–
Subnet mask: Subnet mask of the inverter
–
Gateway: IP address of the network gateway
–
DNS-Adresse: IP address of the DNS server
–
MAC address: Hardware address of the inverter
Result of the last self test (only when the configured country is
n
Italy )
① Designation of the numerical setting
② Value to be set; the selected value to be set is highlighted in
black.
When performing numerical settings of remuneration and dates,
the following applies:
Remuneration
Possible currencies: £ (Pounds), € (Euros), kr (Krones),
n
The maximum value that can be set for remuneration is limited
n
for technical reasons. The remuneration must be set using dif-
ferent units as required. Example: Dollars instead of Cents (set
none ).
a currency of
Date
When setting the month/year, a check is performed to ensure that
the selected day is valid. If not, then the day is automatically cor-
rected.
Example: 31.02.2011 is corrected to 28.02.2011.
Ä 9.3, p. 141 .
none .
GB
91