Operating Buttons; Display; General Information - Steca StecaGrid 3000 Installations- Und Bedienungsanleitung

7.2

Operating buttons

The operating buttons (
But-
Action
ton
ESC Press briefly
Press longer
(≥ 1 second)
Press briefly

Press briefly

SET Press briefly
Press longer
(≥ 1 second)
Tab. 6: Functions of the operating buttons
7.3

Display

7.3.1

General information

For information shown in the display (
• Symbol
input at this time. The resulting waiting time is indicated by the animated sun symbol.
• If hidden content is present, a column with a scroll bar appears at the right side of the display.
The size of the scroll bar indicates the amount of hidden content.
• Selected entries are highlighted in black with white text.
• The backlighting switches off automatically 30 seconds after the last button was pressed.
• Faults are indicated by a red flashing backlighting. An event message is also displayed at the
same time.
Fig. 12, P. 73 shows where the following display content is located in the menu system.
746.217 | 12.27

in Fig. 5) have the following functions:
General
jumps up by one menu level
jumps to status display
• moves the selection bar or the display content upwards
• when performing numerical settings, moves the selection 1 position to
the left
• increases the setting value by 1 step
• moves the selection bar or the display content downwards
• when performing numerical settings, moves the selection 1 position to
the right
• decreases the setting value by 1 step
jumps down by one menu level
• a selected numerical value starts flashing and can be changed
• adopts a change
• changes the state of a control element (check box/radio button)
answers a query dialogue with Yes

: The inverter is processing large amounts of data and is not able to process any user
Function
Guided configuration process
navigates 1 step back
discards any changes
jumps to the start of the guided con-
figuration process
–
navigates 1 step forward
in Fig. 5) the following generally applies:
EN
53