Using A Bp-90A Battery Pack - Sony DNV-5 Bedienungsanleitung

3-2 Power Supply
Attaching the battery pack
1
Slide an NP-1B Battery Pack into the DC-L1
Battery Adaptor.
2
Mount the DC-L1 Battery Adaptor on the back of
the DNV-5.
Back of the
DNV-5
3-2-3 Using a BP-90A Battery
Pack
The DNV-5 will operate continuously for about 105
minutes with a BP- 90A Battery Pack. Use of this
battery pack requires a DC-L90 Battery Adaptor (not
supplied).
Before use, charge the battery pack with a BC-210/
210CE/410/410CE Battery Charger for about 2 hours.
For more information, refer to the BC-210/210CE/410/
410CE manual.
3-4(E)
Chapter 3 Setting Up the Camcorder
Attaching the battery pack
1
NP-1B
DC-L1
2
Fit a BP-90A Battery Pack in the DC-L90 Battery
Adaptor.
1
2
1 Push the lever up.
2 Open the side cover.
Mount the DC-L90 Battery Adaptor on the back of
the DNV-5.
Back of the DNV-5
4
3
5
3 Insert the battery pack.
4 Connect the plug.
5 Close the side cover and
push the lever down.