Sony DNV-5 Bedienungsanleitung Seite 22

2-8 Warnings and Indications on the Display Panel
Time code displays
Lights in playback mode.
Lights when VITC is selected for the time code.
Lights in non-drop frame mode
(for NTSC only).
Lights when the DNV-5 is synchronized
with an external time code.
Lights when the time code
generator is on hold.
DIAG PB VITC NDF EXT-LK HOLD
00:00:00:00
H MIN SEC FRM
p p p p p p p
TAPE E B
E p p p p p p p
BATT F
RF SERVO HUMID SLACK
Lights when the time code, CTL,
or real time is displayed.
Lights when the HOLD button is pressed.
Time counter display: Shows the time code, CTL,
user bits, and real time.
The table on the right lists the details of the
displayed items and switch settings.
Time code displays
2-14(E)
Chapter 2 Locations and Functions of Parts and Controls
OVER EMPH OVER
0
V
H
10
20
30
40
∞
1 2
PEAK dB
Relationships between the DISPLAY switch
and DATA DISPLAY switch settings and the
time counter displays
Except during setting of the time code, the time
counter display is determined by the positions of the
DISPLAY switch and DATA DISPLAY switch.
For details of setting the time code menu operation, see
Section 5-2, "Setting the Time Data" (page 5-2(E)).
Switch settings relating to time code and displayed information
DISPLAY DATA DISPLAY
switch position switch position
CTL Any position
TC Any position
DATA U-BIT
SHOT-TIME
SHOT-NO.
To save the real time in the user bits and display it in the
time counter, a VTR menu setting is required. For details,
see Section 5-5, "VTR Menu Display in the Display Panel"
(page 5-12(E)).
Displayed
information
CTL
Time code
User bits
Date and time from
shot data
Cassette number
and shot number
from shot data