Preparing The Marine Pack (Installing The Battery) - Sony MPK-DVF3 Bedienungsanleitung

Preparing the marine pack (installing the battery)

1
Remove the grip.
Undo the screw on the bottom side
of the marine pack.
2
Insert the lithium battery into the grip.
1 Remove the screw with the
supplied screw driver.
2 Insert the supplied lithium
battery (CR2, x 1) with the
polarity positioned correctly as
indicated on the grip.
3 Fasten the screw tightly.
3
Unfasten the 3 latches and open
the marine pack.
If you lift the metal part in the
direction of the finder when the
latches are open, the latches will
stop.
GB
continued
9
-GB