Power Supply; Power Switch; Chapter 2 Locations And Functions Of Parts And Controls - Sony DNV-5 Bedienungsanleitung

2-1 Power Supply

1 Battery attachment
Attach a BP-L60/L90 Battery Pack, a DC-L1 Battery
Adaptor for loading an NP-1B Battery Pack, or a DC-
L90 Battery Adaptor for loading a BP-90A Battery
Pack.
Further, by connecting an AC-DN1 AC Adaptor, the
DNV-5 can also operate from AC power.
2 DC IN (external power input) connector (XLR
type, 4-pin, male)
Connect an AC-550/550CE AC Adaptor with the DC
cable supplied with the adaptor.
To use an external battery, connect its DC cable to the
DC IN connector.
3 BREAKER button

4 POWER switch

Power supply functions
3 BREAKER button
Excessive current in the internal circuitry, whatever
the cause, will trip the internal circuit breaker,
automatically cutting off the power. If the breaker
trips, consult your Sony service representative.
4 POWER switch
This switch turns the main power supply on and off.

Chapter 2 Locations and Functions of Parts and Controls

1 Battery attachment
2 DC IN connector
2-1(E)