Support Of Special Keyboards - G&D DP1.2-Vision-CAT Bedienungsanleitung

Configuration
How to select a USB-HID mode:
1. Press
Ctrl+Num
2. Select the row
3. Select the row
4. Press F2 to save your settings.
1. Click on KVM Extenders > [All Extenders]
2. Double-click the computer module of the KVM extender to be configured.
3. Click the
General
4. Under
USB HID mode
5. Click to save your changes.
OK

Support of special keyboards

The KVM extender supports special functions of some special keyboards.
Enable the support of such keys if you want to use them at the console.
How to enable or disable the support for special keyboards:
1. Press Ctrl+Num
2. Select the row
of a special keyboard for the remote console (at the
Select the row
support of a special keyboard for the local console (at the
3. Under Enh. keyboard
no
PixelPower C
SKIDATA1
4. Press F2 to save your settings.
38 · G&D DP1.2-Vision-CAT
(default) to open the on-screen display.
Target setup and press
USB HID mode and press
tab.
, select the desired option (see above).
(default) to open the on-screen display.
Console setup and press
Local console setup and press
press F8 to select one of the following options:
 disables support of special keyboards
 enables support of keyboard PixelPower Blue
 enables support of keyboard SKIDATA1
Enter .
F8 key to select an option (see above).
on the directory tree.
Enter if you want to adjust the support
CON
Enter if you want to adjust the
module).
CPU module).