Freeze Mode - G&D DP1.2-Vision-CAT Bedienungsanleitung

Configuration
How to change the colour depth of the image data to be transmitted:
1. Press Ctrl+Num
2. Select the row
3. Under Color depth
24 Bit:  transmits the image data with a maximum colour depth
of 24 bits (default)
18 Bit:  reduces the colour depth of image data to 18 bits
4. Press F2 to save your settings.
1. Click on KVM Extenders > [All Extenders]
2. Double-click the computer module of the KVM extender you want to con-
figure.
3. Click on the tabs
4. Under
Color depth
 transmits the image data with a maximum colour depth
24 Bit:
of 24 bits (default)
 reduces the colour depth of image data to 18 bits
18 Bit:
5. Click to save your changes.
OK

Freeze mode

If the cable connection between the computer module and the user module is inter-
rupted during operation, the KVM extender no longer displays an image at the remote
console.
Enable the Freeze mode if you want the last image that has been displayed at the user
module to be available until the connection is re-established.
To highlight an interrupted connection, the last available image can be displayed
with either a coloured frame and/or a
connection has been interrupted.
34 · G&D DP1.2-Vision-CAT
(default) to open the on-screen display.
Target setup and press
press F8 to select on of the following options:
General .
select one of the following options:
Frozen
Enter .
on the directory tree.
popup and the time passed since the