Keyboard Required To Start The User Module - G&D DP1.2-Vision-CAT Bedienungsanleitung

Keyboard required to start the user module

In the default settings, the user module starts even without a keyboard. As an alter-
native, the user module can interrupt the starting process when no keyboard is con-
nected. After you connect a keyboard to the user module, the starting process is
continued.
How to configure the starting behaviour without a keyboard connected to the
user module:
1. Press Ctrl+Num
2. Select the row
3. Under Keyboard required
 continue starting process without a keyboard (default).
no
yes  interrupt starting process without a keyboard..
4. Press F2 to save your settings.
1. Click on KVM Extenders > [All Extenders]
2. Double-click the computer module of the KVM extender you want to con-
figure.
Click on the tab
3. Under Keyboard required
No  continue starting process without a keyboard (default).
Yes  interrupt starting process without a keyboard.
4. Click OK to save your changes.
(default) to open the on-screen display.
Console setup and press
press F8 to select one of the following options:
Remote > General .
select one of the following options:
Enter .
on the directory tree.
G&D DP1.2-Vision-CAT · 41
Configuration