Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Connecting further interfaces of ARU2 variants
USB 2.0 Trans.
USB 2.0 CPU
Transmission
DP Out
DP CPU
Use the USB-AM/BM-2 cable to connect one of the computer's USB
USB 2.0 CPU:
interfaces to this interface.
Plug a category 5e (or better) twisted pair cable, which is available as
USB 2.0 Trans.
accessory, into this interface. Connect the other end of the cable to the
interface of the user module.
NOTE:
Connect the
USB 2.0 Trans.
card CCD-IO16-Card-MULTI if you want to connect the computer module to a
compatible matrix switch (see page 2).
Mind the notes in the paragraph Purpose and configuration of multi cards in the user
manual of the web application.
Optional: Connecting a local console
USB 2.0 Trans.
USB 2.0 CPU
Transmission
DP Out
NOTE:
The keyboard of the local console can either be a PS/2 or a USB device.
ADVICE:
Use the adapter
USB mouse at the same time.
Keyb./Mouse:
Connect the mouse and/or the keyboard of the local console to this
interface.
DP Out:
Connect the monitor of the local console to this interface.
Keyb./Mouse
In
Line
Out
USB CPU
Keyb. CPU
interface to one of the dynamic ports of the IO
Keyb./Mouse
In
Line
Out
USB CPU
Keyb. CPU
(A6400043) to use a PS/2 keyboard and a
MD6M-2xMD6F
RS232
Red. Power
RS232
Red. Power
G&D DP1.2-Vision-CAT · 7
Installation
USB 2.0 Trans.
Werbung
Kapitel
Inhaltsverzeichnis
