Denon AVR-3803 Bedienungsanleitung Seite 36

ENGLISH
DSP surround simulation
• To operate the surround mode and surround parameters from the remote control unit.
1 Select the surround mode for the input channel.
(Remote control unit)
The surround mode switches in the following order
each time the DSP SIMULATION button is pressed:
WIDE SCREEN SUPER STADIUM ROCK ARENA
VIRTUAL MATRIX VIDEO GAME MONO MOVIE
2
Display the surround parameter screen on the monitor.
The screen for the selected surround mode appears.
(Remote control unit)
3
(Remote control unit)
4
To end the setting mode, press the surround parameter button again.
(Remote control unit)
NOTES:
• The surround speaker setting can also be changed with the SPEAKER button on the remote control unit.
• When "Default" is selected and the 0 courser button is pressed, "CINEMA EQ." and "D.COMP." are
automatically turned off, "ROOM SIZE" is set to "medium", "EFFECT LEVEL" to "10", "DELAY TIME" to
"30ms" and "LFE" to "0 dB".
• The "ROOM SIZE" expresses the expansion effect for the different surround modes in terms of the size
of the sound field, not the actual size of the listening room.
36
JAZZ CLUB
CLASSIC CONCERT
Set the parameters.
• Operating the surround mode and surround parameters from the main unit's panel.
1
Turn the SELECT knob to select the surround
mode.
SELECT
1
(Main unit)
• When turned clockwise
DIRECT STEREO DOLBY PRO LOGIC
VIRTUAL MATRIX VIDEO GAME
2, 4
• When turned counterclockwise
3
DIRECT STEREO DOLBY PRO LOGIC
VIRTUAL MATRIX VIDEO GAME
To select the surround mode while adjusting the surround parameters or tone control, press the
surround mode button then operate the selector.
(Main unit)
2
Press the SURROUND PARAMETER button.
Press and hold in the surround parameter button to select the parameter you want to
set.
• The parameters which can be set differ for the different surround modes. (Refer to
"Surround Modes and Parameters" on page 38.
(Main unit)
3
Display the parameter you want to adjust, then turn the SELECT knob to set it.
NOTE:
• When playing PCM digital signals or analog signals in the DOLBY PRO LOGIC II, DTS NEO:6 modes and
the input signal switches to a digital signal encoded in Dolby Digital, the Dolby surround mode switches
automatically. When the input signal switches to a DTS signal, the mode automatically switches to DTS
surround.
II DTS NEO:6 5/7CH STEREO WIDE SCREEN SUPER STADIUM
MONO MOVIE CLASSIC CONCERT JAZZ CLUB ROCK ARENA
II DTS NEO:6 5/7CH STEREO WIDE SCREEN SUPER STADIUM
MONO MOVIE CLASSIC CONCERT JAZZ CLUB ROCK ARENA
1 2 1,3