Denon AVR-3803 Bedienungsanleitung Seite 21

2 Operate the component.
• For details, refer to the component's operating instructions.
Some models cannot be operated with this remote control unit.
1. Digital video disc player
(DVD, DVD SETUP) system
buttons DVD
POWER : Power on/standby
(ON/SOURCE)
6,7 : Manual search
(forward and reverse)
2 : Stop
1 : Play
8,9 : Auto search
(to beginning of track)
3 : Pause
0 ~ 9, +10 : 10 key
DISC SKIP + : Disc skip
(for DVD changer only)
DISPLAY : Display
MENU : Menu
RETURN : Return
SETUP : Setup
ENTER : Enter
•, ª, 0, 1 : Cursor up, down, left
and right
3. Video deck (VCR-1/VCR-2)
system buttons
VCR1
POWER : Power on/standby
(ON/SOURCE)
6,7 : Manual search
(forward and reverse)
2 : Stop
1 : Play
3 : Pause
Channel +, – : Channels
2. Video disc player (VDP)
system buttons
VDP
POWER : Power on/standby
(ON/SOURCE)
6,7 : Manual search
(forward and reverse)
2 : Stop
1 : Play
8,9 : Auto search (cue)
3 : Pause
0~9, +10 : 10 key
4. Monitor TV (TV), digital
broadcast satellite (DBS)
tuner and cable (CABLE) TV
system buttons
POWER : Power on/standby
(ON/SOURCE)
MENU : Menu
•, ª, 0, 1 : Cursor up, down,
left and right
ENTER : Enter
CHANNEL : Switch channels
+, –
0~9, +10 : Channels
TV/VCR : Switch between TV
and video player
TV VOL +, – : Volume up/down
DISPLAY : Switch display
RETURN : Return
Learning function
If your AV component is not a DENON product or if it cannot be operated using the preset memory, it can be
controlled with the included remote control unit by storing its remote control signals in the remote control unit.
For some remote control signals it is not possible to "learn" the signals or the device will not operate properly.
In such cases use the remote control unit included with the device to operate it.
1
Press the power ON/SOURCE button and the
OFF button simultaneously.
• "PRE" appears on the
remote control
display.
2
Use the • and ª cursor buttons to display
"LRN" on the remote control unit's display, then
press the ENTER button.
• "SEL" is displayed.
3 Use the • and ª cursor buttons to select the
mode for the button to be "learned", then press
the ENTER button.
• "KEY" is displayed.
4
Press the button to be "learned" while "KEY"
is displayed. "START" appears.
• "AGAIN" is displayed if a
button that cannot be
"learned" is pressed.
• To cancel, press the power ON/SOURCE
button and the OFF button simultaneously.
5
Point the remote control units directly at each
other and press and hold in the button on the
other remote control unit which you want to
"learn".
Other remote
control unit
1, 4, 8
DVD
unit's
7
2, 3
6
"OK" appears on the remote control unit's
display and learning is completed.
• "KEY" is displayed. Other keys can be
"learned" by repeating steps 4 to 5.
7
The mode can be switched by pressing a mode
button while the "KEY" indicator is lit.
When the "ENTER" button is pressed, the
"KEY" display reappears and the learning
standby mode is set.
8
To cancel the learning mode, press the power
ON/SOURCE button and the OFF button
simultaneously again.
Registering is not possible in the receiver
mode.
ENGLISH
1, 4, 8
2, 3, 7
21