orbit controls OCM191 Betriebsanleitung Seite 39

Orbit Controls AG
Command
SYSTem
:ERRor?
:REMote
:RWLock
:LOCal
Tab XII. SCPI System commands
Command
STATus
:OPERational
:EVENt?
:ENABle <DPND>
:ENABle?
:CONDition?
:QUEStionable
:EVENt?
:ENABle <DPND>
: ENABLe?
: CONDition?
: PRESet
Betriebsanleitung
SYSTem Command Summary
Path to System commands.
Returns the first error in the error queue.
Places the Calibrator in the Remote mode.
Places the Calibrator in the Remote mode with lockout.
Sets the Calibration to the Local mode.
STATus Command Summary
Path to the Status commands.
Path to the Operational Data registers.
Returns value in Operational Data Event register.
Sets the bits of the Operational Data Enable register.
Returns the value in the Operational Data Enable
register.
Returns the value in the Operational Condition register.
Path to the Questionable Data Event register.
Returns value in Questionable Data Event register.
Sets the bits of the Questionable Data Enable register.
Returns the value in the Questionable Data Enable
register.
Returns the value in the Questionable Condition
register.
Clears all bits in Operation Data Enable and
Questionable Data Enable register.
Tab XIII. SCPI Status commands
OCM191 Isolation Tester - Kalibrator
Description
Description
39