Entered On The Device; Entered Using The Setup Program - JUMO DICON touch Kurzanleitung

Type
Fixed-setpoint
controller
Program control-
ler
8.4.1

Entered on the device

The setpoint values in the parameter level are entered on the device.
8.4.2

Entered using the setup program

The setpoint values are entered in the setup dialog parameter level.
Signal 2 (Bit 1) Signal 1 (Bit 0)
setpoint setpoint
changeover changeover
0 0
0 1
1 0
1 1
8 Parameterization
Setpoint value,
Controller 1
Setpoint value 1
Setpoint value 2
Setpoint value 3
Setpoint value 4
W1 and W2 are predefined by the program
generator
Setpoint value,
Controller 2
Setpoint 1
Setpoint value 2
Setpoint value 3
Setpoint value 4
53