Intended Use, Misuse; Galvanic Isolation - JUMO DICON touch Kurzanleitung

4 Electrical connection
4.1.3

Intended use, misuse

• The controller is intended for use in the industrial sector.
WARNING!
The controller is not suitable for installation in areas with an explosion hazard
There is the risk of an explosion.
The device must only be used outside of areas with an explosion hazard.
4.2

Galvanic isolation

22
Analog input IN8
AC 30 V
DC 50 V
Analog input IN11
AC 30 V
DC 50 V
Digital input 1
Digital input 7
(potential free
contact)
Voltage supply
AC 240 V
AC 3600 V
Voltage supply
AC/DC 24 V
AC 3600 V
USB
(host, device)
RS422/485
AC 30 V
DC 50 V
PROFIBUS
AC 30 V
DC 50 V
Analog output
AC 30 V
DC 50 V
Relay outputs
AC 3600 V
2 PhotoMOS® solid state relay
U = DC 45 V, I
max.
U = AC 30 V, I
max.
AC 30 V
DC 50 V
2 solid state relay outputs
AC 230 V, 1 A
for controlling motor actuators
AC 3600 V
2 logic outputs
DC 0/12 V, max. 20 mA
(short-circuit proof)
1 l ogic output
DC 0/22 V, max. 30 mA
(short-circuit proof)
AC 30 V
DC 50 V
1 solid state relay output
AC 230 V, 1 A
AC 3600 V
Ethernet, PROFINET
AC 30 V
DC 50 V
= 200 mA
max.
= 200 mA
max.