JUMO DICON touch Kurzanleitung Seite 104

5 Operation
Start manual mode
In manual mode, the controller is fixed at a particular output level. First of all, the screens show
the active controller, where the output is at approx. 40 %.
Step
1
2
3
You can now manually influence the output level (by hand)
Exit manual mode
By touching the screen below the hand, you can exit manual mode and return to normal con-
troller operation.
Self-optimization
B 703571.0- Chapter 12.6.3 "Self-optimization controller", page 82
36
Activity
Touch the hand symbol (pencil appears at output level display)
Touch the pencil, enter the manual output level and confirm (green arrow)
The controller operation is interrupted and Controller 1 is now working with a fixed output
level of 20 % (the hand symbol appears next to the green setpoint value).
You can view the difference between the fixed-setpoint controller and the program control-
ler at the automatic operation icon in the top right-hand corner. The green setpoint value
continues, as programmed.