Identifying The Instrument Version - JUMO iTRON 702040 Betriebsanleitung

1

Identifying the instrument version

(1) (2)
7020 . . / . . – . . . – . . . – . . / . . . ,...
(1) Basic type
(bezel in mm)
(2) Basic type
extension
(3) Inputs
(4) Outputs
1. single-setpoint controller with limit comparator, see factory settings under configuration and parameter level
2. see customer's ordering text or settings under configuration and parameter level
(3) (4) (5)
40 = 48 x 24, 41 = 48 x 48, 42 = 48 x 96 (portrait), 43 = 96 x 48 (landscape), 44 = 96 x 96
88 = controller type configurable
99 = controller type configured to customer specification
888 = inputs configurable
999 = inputs configured to customer specification
000 = Standard
Output 1
Output 2
Output 3
Options
113 = Output 2
(outputs 1+3 as for
Standard)
101 = Output 2
(output 1 as for Standard)
(6)
1
1
Type 702040/41
relay (n.o. make)
logic 0/5V, optionally
configurable as logic input
(not available)
Type 702040/41
logic 0/12V, optionally
configurable as logic input
relay (n.o. make)
(logic input is always available)
2
2
Type 702042/43/44
relay (n.o. make)
logic 0/5V
relay (n.o. make)
Type 702042/43/44
logic 0/12V
not possible
4