Creation Of A New Automatic Program - Minipack-Torre Pratika 56 Anweisungen Zur Bedienung Und Wartung

Chapter 5. Machine adjustment and setting up
Enter the "Password" in the same way.
Once you have entered the
"Name" e and the "Password"
press these two buttons in the
sequence indicated in order to
access the display screens.
Password Reset
To restore programme security with a password follow the procedure described below.
From the initial screen press
the "Setup" button.

5.2.3. Creation of a new AUTOMATIC PROGRAM

The machine normally works in automatic cycle.
The machine is provided with an already memorised automatic program (P1), but with standard parameters.
We recommend creating a new program with the specific settings for your product, before packing it.
To create a new program, proceed as follows.
Press the "Program
configuration" button.
Press the "Logout" button and
then the button "Main".
Press the "New" button.
40
Note: the padlock symbol next
to the symbol disappears.
The "padlock" symbol has re-
appeared indicating that the
programme is protected with a
password.
To rename the just copied new
program, click on the name (e.g.
r3) and type in the new name.
Press Enter then the "Save"
button.
EN