Adjustment Of Film Opening Bar; Packaging - Minipack-Torre Pratika 56 Anweisungen Zur Bedienung Und Wartung

Chapter 5. Machine adjustment and setting up EN

5.5.4. Adjustment of film opening bar

The bar (A1) allows to separate the 2 edges of the film reel.
Position the bar inside the 2 edges of the film so that the end is 1
cm behind the crease of the film.
Note: See paragraph 5.4: PHASE 1.

5.6. Packaging

Once all adjustments have been made, the machine is ready to
start working.
With the machine in condition "Automatic STOP" press the
START key.
The belts will begin operating and it is possible to place the
products on the infeed belt.
When the product travels along the outfeed belt, the sealing frame
descends to seal the film.
The packaged product advances towards the roller conveyor or
inside the tunnel to shrink the film.
56