Parameter Settings For The Automatic Program (From "Graphic") - Minipack-Torre Pratika 56 Anweisungen Zur Bedienung Und Wartung

Chapter 5. Machine adjustment and setting up EN

5.2.5. Parameter settings for the AUTOMATIC PROGRAM (from "graphic")

In the previous pages, we have seen how it is possible to view/set the parameters for an automatic program by means
of the "Data" key.Another method is explained in the following diagram, which enables you to view/set only the desired
parameters, without having to scroll through all the screens. This is possible by selecting the relevant area from the
machine's graphic.
45