Chapter 5 Machine Adjustment And Setting Up; Control Panel - Minipack-Torre Pratika 56 Anweisungen Zur Bedienung Und Wartung

Chapter 5. Machine adjustment and setting up

5.1. Control panel

The machine is equipped with a touch control panel where it is possible to set all operation and programming features.
Only use one finger to select an object on the panel for correct touch panel use. If the panel is pressed in
two or more points at the same time it is possible that you select an object unintentionally.
Q1 Main switch.
D Display. Displays selected functions and relative settings.
S1 "EMERGENCY buttons.
Both buttons immediately stop the machine in case of immediate danger or to "place it in maintenance
conditions". If they are pressed, they need to be turned clockwise to release them.
S2 Button "RESET".
Press when starting up the machine.
Reset the machine after the "EMERGENCY" pushbutton and the A001 alarm have been activated.
S3 "BYPASS SAFETY PROTECTIONS" selector.
If this selector switch is set to OFF, the machine may only be operated if the guards are closed (AUTOMATIC
program).
If this selector switch is set to ON, the machine may be operated with the guards open. This condition is
necessary "only" when carrying out the set-up procedures and when inserting or changing the film reel (MANUAL
program only).
E Luminous column.
The combination of the colours and buzzer signal the machine status at all times.
35
EN