Manual Mode; Choice Of Language; List And Explanation Of Configurable Variables (Automatic Program) - Minipack-Torre Pratika 56CS Installations-, Gebrauchs- Und Wartungsanleitung

Chapter 6. Machine adjustment and setting up

6.2.1.2. MANUAL mode

ACTIVATION OF "SEALING"
Press the button (16)
ACTIVATION OF "FILM ADVANCEMENT"
Press the button (15)
Note: use of these 2 buttons is important during the film insertion phase (see chapter 6.4): PHASE 5).

6.2.2. Choice of language

To choose the language in which the data will appear on the display, follow the procedure described below:
From home menu
Press the button (12)
Press the button (11)
to select the language you
desire from among those on
the list (e.g. ITA):
ITA: Italian
ENG: English
FRA: French
GER: German
ESP: Spanish

6.2.3. List and explanation of configurable variables (AUTOMATIC program)

To display the configured program variables, proceed as follows.
Program variable values can be
set only if the machine is at
STOP.
Press the button (12)
While programming, press button (9)
This condition is necessary when carrying out the set-up procedures and when inserting or
changing the film reel.
to activate the sealing cycle.
to activate movement of the wheels for film advancement.
Press the button (11)
Press the button (12)
to confirm the language chosen.
The display views the type of menu <USER 1>.
At this point:
with the button (12)
and with the buttons (11)
to go back to the main screen.
Press the button (12)
The screen appears with the new
language.
program variables are scrolled
and (10)
31
GB
the desired value is set.