Chapter 1. Foreword; Preface; Performances Of Packaging Machine; Machine Identification - Minipack-Torre MV45 Installations, Gebrauchs Und Wartungsanweisungen

Chapter 1. Foreword

1.1. Preface

This manual has been drawn up in compliance with the UNI 10893 standard dated July 2000. It is meant for all users in
order to enable them to use the machine correctly. Keep it in a place which can be easily accessed in the proximity of the
machine and which is known to all users. This manual is an integral part of the machine for safety reasons. We wish to
specify the symbols in use here below in order to improve their understanding.
ATTENTION:
Accident prevention rules for the operator. This warning indicates the presence of dangers which
can injure the person operating on the machine.
ATTENTION:
Hot members. It shows the danger of burning, thus involving the risk of a serious accident for the
exposed person.
WARNING:
It indicates the possibility of damaging the machine and/or its components.

1.2. Performances of packaging machine

This machine represents what the modern technology of vacuum-packing may express at its best. It is flexible, easily
programmable and cheap. It is intended to vacuum-pack foodstuffs by removing oxygen as well as any chemical and
biological pollutant present in the environment. To attain the vacuum level you wish, just program the machine in order to
remove almost all the air contained in the packet. Your product will preserve its organoleptic features, colour, taste,
flavour and nutritive value for a long time.

1.3. Machine identification

In every communication with the Manufacturer, always mention the model and the serial number specified on the plate
on the rear part of the machine (figure 1.3. page 50).

1.4. Technical data of the machine

Package weight and sizes (figure 1.4.A page 50).
Width W = 630 mm
Length l = 685 mm
Height H = 665 mm
Weight = 90 Kg
Machine weight and sizes (figure 1.4.B page 50).
Width = 550 mm
Length = 600 mm
Height with closed cover = 497 mm
Height with open cover = 840 mm
Weight = 80 Kg
Electrical system
Voltage (V): see data on plate
Frequency (Hz): see data on plate
Maximum absorbed power (W): see data on plate
Maximum absorbed current (A): see data on plate
Vacuum pump = 20m³
I = Electrical connections (figure 1.4.B page 50).
H = Gas connection (figure 1.4.B page 50).
10