Sonnenkraft SKSCEM1 Handbuch Seite 29

Display indication in the „Heat.loop 1(2/3)"menu of the SKSC3+ controller
• Tflow
Current flow temperature
• Toutd.
Current outdoor temperature
• Man.corr.
Remote control correction
• Targ.flow
Current set flow temperature
• S3
Current temperature at the 1
source sensor
• S4
Current temperature at the 2
source sensor
• S6
Current HW­RH temperature
• Pump
Status on/off
• Mixer
Status on/off
• HW-RH
Status on/off
• Afterheating
Status on/off
• Night corr.
Night correction adjustment channel
• Day corr.
Day correction adjustment channel
• Tflowmax
Maximum flow temperature adjustment
channel
• Heating curve
Heating curve adjustment channel
• Mixer
Mixer runtime adjustment channel
• Summer
Summer operation adjustment channel
• DHW priority
DHW priority adjustment channel
• HL Idle
Option HL in night correction off
• T-HLoff
Adjustment value for limit temperature
T­HLoff
• Reheating
Afterheating adjustment channel
• ΔT-RH-on
Afterheating switch­on difference ad­
justment channel
• ΔT-RH-off
Afterheating switch­off difference ad­
justment channel
• SKSRTA11
SKSRTA11 remote control adjustment
heat
st
channel
• Pump HLmax
Pump option adjustment channel
heat
nd
• Cooling function
Heating circuit cooling function adjust­
ment channel
• T-Cooling
Heating circuit cooling function adjust­
ment value
• Min.
Minimum temperature limitation ad­
justment channel
• T-Min.
Minimum temperature limitation ad­
justment value
• WTHop.
Heating operation week timer adjust­
ment channel
• WTRHop.
Afterheating week timer adjustment
channel
• HW-RH
DHW afterheating adjustment channel
• T-HW-on
HW­RH switch­on temperature adjust­
ment channel
• T-HW-off
HW­RH switch­off temperature adjust­
ment channel
• t1,2,3-HW-on
Adjustment channel timer HW­RH on
• t1,2,3-HW-off
Adjustment channel timer HW­RH off
GB
29