Cleaning, Maintenance, And Storage - Scheppach Hbs20 Original Bedienungsanleitung

Such damaged electrical connection cables must not be used and are
life-threatening due to the insulation damage.
Check the electrical connection cables for damage regularly. Make sure
that the connection cable does not hang on the power network during
the inspection.
Electrical connection cables must comply with the applicable VDE and
DIN provisions. Only use connection cables with the marking „H05VV-F".
The printing of the type designation on the connection cable is manda-
tory.
AC motor:
• The mains voltage must be 230 - 240 V~ 50 Hz.
• Extension cables up to 25 m long must have a cross-section of 1.5
mm .
2
Connections and repairs of electrical equipment may only be carried out
by an electrician.
Please provide the following information in the event of any en-
quiries:
• Type of current for the motor
• Machine data - type plate
• Machine data - type plate

12. Cleaning, maintenance, and storage

m Important!
Prior to any adjustment, maintenance or service work disconnect the
mains power plug!
Cleaning
Keep all safety devices, air vents and the motor housing free of dirt and
dust as far as possible. Wipe the equipment with a clean cloth or blow it
with compressed air at low pressure.
GB | 65
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58