Safety Information - Scheppach Hbs20 Original Bedienungsanleitung

The manufacturer shall not be liable for any changes made to the ma-
chine nor for any damage resulting from such changes.
Even when the machine is used as prescribed it is still impossible to
eliminate certain residual risk factors. The following hazards may arise
in connection with the machine's construction and design:
• Damage to hearing if ear-muffs are not used as necessary.
• Harmful emissions of wood dust when used in closed rooms.
• Contact with the blade in the uncovered cutting zone.
• Injuries (cuts) when changing the blade.
• Injury from catapulted workpieces or parts of workpieces.
• Crushed fingers.
• Kickback
• Tilting of the workpiece due to inadequate support.
• Touching the blade.
• Catapulting of pieces of timber and workpieces.
Please note that our equipment has not been designed for use in com-
mercial, trade or industrial applications. Our warranty will be voided if
the equipment is used in commercial, trade or industrial businesses or
for equivalent purposes.

5. Safety information

Attention!
The following basic safety measures must be observed when using
electric tools for protection against electric shock, and the risk of injury
and fire. Read all these notices before using the electric tool and keep
the safety instructions for later reference.
Safe work
1. Keep the work area orderly
- Disorder in the work area can lead to accidents.
2. Take environmental influences into account
- Do not expose electric tools to rain.
- Do not use electric tools in a damp or wet environment.
- Make sure that the work area is well-illuminated.
46 | GB
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58