Device Description (Fig. 1-16) - Scheppach Hbs20 Original Bedienungsanleitung

In addition to the safety regulations in the operating instructions, you
have to meet the applicable regulations that apply for the operation of
the machine in your country.
Keep the operating instructions package with the machine at all times
and store it in a plastic cover to protect it from dirt and moisture. Read
the instruction manual each time before operating the machine and
carefully follow its information.
The machine can only be operated by persons who were instructed con-
cerning the operation of the machine and who are informed about the
associated dangers. The minimum age requirement must be complied
with.
In addition to the safety requirements in these operating instructions and
your country's applicable regulations, you should observe the general-
ly recognized technical rules concerning the operation of woodworking
machines.
We accept no liability for damage or accidents which arise due to non-ob-
servance of these instructions and the safety information.

2. Device description (Fig. 1-16)

1. Clamping screw
2. Top saw band roller
3. Rubber surface
4. Saw band guard
5. Top saw band guide
6. Table insert
7. Saw table
8. Bottom saw band roller
9. Foot
10. Cover locking mechanism
11. Side cover
12. On/off switch
13. Locking screw for top saw band roller
14. Set screw for top saw band roller
15. Machine frame
GB | 43
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58