Remaining hazards
The machine has been built using modern technology in accordance
with recognized safety rules. Some remaining hazards, however, may
still exist.
• Risk of injury for fingers and hands by the rotating saw band due to
improper handling of the work piece. Risk of injury through the hurl-
ing work piece due to improper handling, such as working without the
push stick.
• Risk of damaging your health due to wood dust and wood chips. Wear
personal protective cloth such as goggles. Use a fitting dust extractor.
• Risk of injury due to defective saw band. Regularly check saw band
for such defects.
• Risk of injury for fingers and hands while changing saw band. Wear
proper gloves.
• Risk of injury due to starting saw band while switching on the machine.
• The use of incorrect or damaged mains cables can lead to injuries
caused by electricity.
• Wear only close fitting clothes. Remove rings, bracelets and other jew-
ellery.
• For the safety of long hair, wear a cap or hair net. Even when all safety
measures are taken, some remaining hazards which are not yet evi-
dent may still be present.
• Remaining hazards can be minimized by following the instructions in
„Safety information", "Intended use" and in the entire operating man-
ual.
52 | GB
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58