Scheppach HBS20 Original Bedienungsanleitung Seite 51

• Blades that are misshapen or damaged in any way must not be used.
• If the table insert is worn, replace it.
• Never operate the machine if either the door protecting the blade or
the detachable safety device are open.
• Ensure that the choice of blade and the selected speed are suitable for
the material to be cut.
• Do not begin cleaning the blade until it has come to a complete stand-
still.
• For straight cuts of small workpieces against the longitudinal limit stop
the push stick has to be used.
• Wear gloves when handling the saw blade and rough materials
• The bandsaw blade guard should be in its lowest position close to the
bench during transport.
• For miter cuts when the table is tilted, the parallel stop must be posi-
tioned on the lower part of the table.
• Never use guards to lift or transport items.
• Ensure that the bandsaw blade guards are used and correctly adjust-
ed.
• Keep your hands a safety distance away from the bandsaw blade. Use
a push stick for narrow cuts.
• The push stick has to be stored on the intended device, so that it can
be reached from normal working position and is always ready to be
used.
• In the normal operating position the operator is in front of the machine.
Warning!
This electric tool generates an electromagnetic field during operation.
This field can impair active or passive medical implants under certain
conditions. In order to prevent the risk of serious or deadly injuries, we
recommend that persons with medical implants consult with their physi-
cian and the manufacturer of the medical implant prior to operating the
electric tool.
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58
GB | 51