Scheppach HBS20 Original Bedienungsanleitung Seite 49

- Make sure that the switch is switched off when plugging the plug into
an outlet.
18. Use extension cables for outdoors
- Only use approved and appropriately identified extension cables for
use outdoors.
- Only use cable reels in the unrolled state.
19. Remain attentive
- Pay attention to what you are doing. Remain sensible when working.
Do not use the electric tool when you are distracted.
20. Check the electric tool for potential damage
- Protective devices and other parts must be carefully inspected to
ensure that they are fault-free and function as intended prior to con-
tinued use of the electric tool.
- Check whether the moving parts function faultlessly and do not jam
or whether parts are damaged.
- All parts must be correctly mounted and all conditions must be ful-
filled to ensure fault-free operation of the electric tool.
- The moving protective hood may not be fixed in the open position.
- Damaged protective devices and parts must be properly repaired or
replaced by a recognised workshop, insofar as nothing different is
specified in the operating manual.
- Damaged switches must be replaced at a customer service work-
shop.
- Do not use any faulty or damaged connection cables.
- Do not use any electric tool on which the switch cannot be switched
on and off.
21. ATTENTION!
- The use of other insertion tools and other accessories can entail a
risk of injury.
22. Have your electric tool repaired by a qualified electrician
- This electric tool conforms to the applicable safety regulations. Re-
pairs may only be performed by an electrician using original spare
parts. Otherwise accidents can occur.
-
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58
GB | 49