Scope Of Delivery; Intended Use - Scheppach Hbs20 Original Bedienungsanleitung

51. 5 mm Allen key

3. Scope of delivery

• Bandsaw/Bandsaw blade (pre-assembled)
• Saw table
• Push stick
• Parallel stop
• Open-ended spanner, size 10/13
• Allen key, size 3/4/5
• Screwdriver
• Original operating instructions

4. Intended use

The band saw is designed to perform longitudinal and cross cuts on
timber or wood-type materials. To cut round materials you must use
suitable holding devices.
The equipment is to be used only for its prescribed pur-
pose. Any other use is deemed to be a case of misuse.
The user / operator and not the manufacturer will be liable for any dam-
age or injuries of any kind caused as a result of this.
The machine is to be operated only with suitable saw blades. To use
the machine properly you must also o serve the safety regulations, the
assembly instructions and the operating instructions to be found in this
manual.
All persons who use and service the machine have to be acquainted
with this manual and must be informed about the machine's potential
hazards. It is also imperative to observe the accident prevention regu-
lations in force in your area. The same applies for the general rules of
occupational health and safety.
GB | 45
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58