Console - Kärcher MIC 45 classic Originalbetriebsanleitung

Console

This machine is available in two different
models. These instructions describe both
of these models:
Version 1: MIC 45 classic
The working hydraulic is controlled via
–
levers
no automatic drive and work pro-
–
grammes
Version 2: MIC 45 advanced
with drive position preselector ECAT
–
with multi-function lever to control the
–
work hydraulics
ECAT = Electronic Computer Aided Trans-
mission
Instruments and indicator lamps
1 Display drive speed
2 Cool water temperature
3 Tank indicator
4 Operating hours meter for motor
5 Warning lamp for battery charging con-
trol
6 Warning lamp oil pressure
7 Warning lamp engine temperature
8 Indicator lamp for parking brakes
9 Indicator lamp work hydraulics ON
10 Indicator lamp for high beams
11 Indicator lamp for directional indicator
12 Speed level 2: up to 40 km/h (for MIC
45 advanced only)
Important instruction: This machine
may only be operated while standing
up!
13 Indicator lamp for float position
Ceiling panel
1 Front work light switch
2 Rear work light switch
3 Switch beacon lamp
4 Radio
5 Interior lights
6 Sun visor
Switches on dashboard
1 Setting the motor rpm (hand throttle)
For the MIC 45 classic: for work mode
and drive mode
for the MIC 45 advanced: for work
mode only, drive mode only possible in
rear position
2 Drive position preselector (MIC 45 ad-
vanced only) *
3 Multi-function lever work hydraulics
(MIC 45 advanced only or as an option
for the MIC 45 classic) *
4 Lever for left rear work hydraulics (MIC
45 advanced only or as an option for the
MIC 45 classic) *
5 Cruise control
6 Lights
Front position: For
Central position: Parking light
Rear position: Driving light
7 Wiper
Front position: For
Central position: normal operation
Rear position: fast operation
8 Windscreen washer system
9 Warning system
10 Front work hydraulics - 30 l/min
11 Front work hydraulics - 60 l/min (option)
(actuate together with Pos. 10)
12 Rear right work hydraulics - 30 l/min
(option)
13 Seat heater (option)
14 Ignition key
15 Heating and air conditioning *
16 On board socket 12 V
4
-
EN
17 Turning knob for setting the lowering
speed of the front attachment frame *
* see detailed descriptions
Pedals and steering wheel
1 Blinker lever and horn
(press to sound horn)
2 Steering wheel *
3 Driver's seat *
4 Accelerator pedal *
5 Locking mechanism of emergency
brake
6 Pedal for parking brake
7 Inching pedal/brake pedal *
8 Equalizing reservoir brake fluid
* see detailed descriptions
Driver cabin
* not pictured
1 Driver's door
2 Driver's door release
3 Cabin door
(can only be opened from the inside)
4 Interior door unlock
Ignition
ON
GL
OFF ST
1 OFF: Ignition off
2 ON: Ignition on
3 GL: Pre-heat
4 ST: Start motor
21