Control Elements - Steca StecaGrid 3000 Installations- Und Bedienungsanleitung

EN
7.3.3

Control elements

The control elements shown on the display, which are used for performing settings in the inverter,
are described below using illustrative examples.
Selection list with check boxes
2 2
2 2
2 2
Selection list with radio buttons
2 2
2 2
2 2
Dialogues
Numerical settings
2 2
56
1
3
1
3
1
2 2
3
1
2 2 2 2

Designation of the selection list

Check boxes with names:
Check boxes allow multiple selection
–
The currently selected check box is highlighted in black
–
Preset check boxes have no frame and are always
–
switched on (cannot be changed)

Scroll bar

Designation of the selection list

Radio buttons with names:
Radio buttons are exclusive-OR (only 1 radio button
–
can be switched on)
The currently selected radio button is highlighted in
–
black

Scroll bar

Dialogue heading

A question presented to the user

Response possibilities:
Back (cancel): Press ESC
Confirm (answer the question with Yes): Press and hold
SET for 1 second

Designation of the numerical setting

Value to be set; the selected value to be set is highlighted
in black.
When performing numerical settings of remuneration and
dates, the following applies:
Remuneration
• Possible currencies: £ (Pounds), € (Euros), kr (Krones),
none.
• The maximum value that can be set for remuneration is
limited for technical reasons. The remuneration must be
set using different units as required. Example: Dollars
instead of Cents (set a currency of none).
Date
When setting the month/year, a check is performed to ensure
that the selected day is valid. If not, then the day is automati-
cally corrected.
Example: 31.02.2011 is corrected to 28.02.2011.
746.217 | 12.27