Steca StecaGrid 3000 Installations- Und Bedienungsanleitung Seite 83

Event message Description
Grid islanding
There is no grid voltage present (inverter running independently). For safety reasons,
has been de-
the inverter must not feed into the grid and switches off while the error is present
tected
(dark display).
Contact your installer if this error occurs frequently.

Time/date lost The inverter has lost the time settings because it was disconnected from the grid for
too long. Yields cannot be stored and event messages will have the wrong date.
Correct the time under Settings / Time/Date.

Intern. info
Contact your installer if this information occurs frequently.

Intern. warn- Contact your installer if this warning occurs frequently.

ing
Intern. error Contact your installer if this error occurs frequently.

Self test
An error occurred during the self test and the self test was cancelled.
failed
Contact your installer when

–
–
Faulty country
An inconsistency exists between the selected country settings and those stored in
setting
memory.
Contact your installer.

Tab. 10: List of event messages
746.217 | 12.27
the self test is cancelled due to an error several times at different times of the
the day and
it is certain that the grid voltage and frequency were within the limit values
defined by the country setting; see Section 14.3, P. 85.
EN
Type
81