Steca StecaGrid 3000 Installations- Und Bedienungsanleitung Seite 77

Editing selection lists containing check boxes
Editing selection lists containing radio buttons
Changing numeric settings
Responding to dialogs
746.217 | 12.27
✔ A selection list with check boxes is displayed (Fig. left).
1. Press  to select a check box.
2. Press SET. The state of the check box changes from
on to off and vice-versa (preset check boxes cannot be
changed).
3. Repeat steps 1 and 2 for further check boxes as re-
quired.
4. Press ESC. The changes are adopted and the next higher
menu level is displayed.
✔ A selection list with radio buttons is displayed (Fig. left).
1. Press  to select a radio button that is currently
switched off.
2. Press SET. The selected radio button is switched on and
the previously switched on radio button is switched off.
3. Press ESC. The next higher menu level is displayed.
✔ A numeric setting is displayed (example Date in Fig. left).
1. Press SET. The selected value flashes (Day in Fig. left).
2. Press  to change the value.
3. Press SET. The change is adopted (value no longer
flashes) or
Press ESC, to cancel the change (value no longer flash-
es).
4. Press . The next value is selected.
5. Repeat steps 1 to 4 for the remaining values.
6. Press ESC. The next higher menu level is displayed.
✔ A dialogue is displayed (Fig. left).
Press SET or ESC as follows:

Press SET for 1 second to answer with Yes.
–
Press ESC to answer with No.
–
EN
75