General Operating Functions; Main Operating Functions; Menu Navigation - Steca StecaGrid 3000 Installations- Und Bedienungsanleitung

EN
9.2

General operating functions

• Hidden content is shown using the  and  buttons.
• Repeated button presses: If  need to be pressed repeatedly, you can alternatively hold these
buttons pressed for a long time. The rate of repetition increases the longer the button is held.
• Pressing any button switches on the backlight of the display if this has previously automatically
switched off.
9.3

Main operating functions

The figures in this section show examples.
Status display

Menu navigation

Event messages
Displaying yields numerically (list) and graphically (chart)
74
1. Press ESC for 1 second to call up the status display as
required (Fig. left).
2. Press  to display a different status value.
1. Press ESC for 1 second to call up the status display as
required.
2. Press SET. The main menu is displayed with the top
item selected.
3. Press  to select a menu item.
4. Press SET to call up the submenu (Fig. left).
5. Repeat steps 3 and 4 for further submenus as required.
See Section 11, P. 79.
✔ The status display is shown.
1. Press SET. The main menu is displayed with Yield
selected.
2. Press SET. The list with yield time periods is shown.
3. Press  to select a yield time period.
4. Press SET. The individual yields for the yield time period
are shown in a list (Fig. upper left).
5. Press  to select an individual yield value.
6. Press SET. The selected individual yields are shown in a
chart (Fig. lower left).
7. Press  to page through the charts.
8. Press SET to return to the list.
746.217 | 12.27