Status Display - Steca StecaGrid 3000 Installations- Und Bedienungsanleitung

EN
7.3.2 Information
The information shown on the display is described below using illustrative examples.

Status display

The status display shows measurements as listed below:
3
Menu
2
Numeric yield (day, month, year)
Daily, monthly and annual yields can be displayed numerically in a List.
Numeric yield (total yield)
The total yield is displayed in its own window.
54
1
2 2
F
4 5 6 7 8
_
1
1
2
1
2 2
3

Measurement name

Measurement with units

Date

Symbol Non-confirmed event messages; more information
on this is provided in Section 11, P. 79.

Animated Connect symbol with 2-digit inverter address;
indicates data traffic on the RS485 bus.

Symbol Derating

Symbol Fixed voltage mode activated

Time
The following applies to the status display:
• The measurements shown in the status display are de-
fined under Settings/Measurements. Some measure-
ments are always displayed (default setting).
• Current values are not displayed at night (solar irradiation
too low; example in Fig. left).
• The CO savings shown in the status display are calcu-
2
lated using the savings factor 508 g/kWh.

Designation of the main/submenu

Menu entries

Yield period (day/month/year)

Individual yields with period and value (1 per row)
The yield periods contain the following numbers of individual
entries:
Day yield: last 31 days
1)
Monthly yield: last 12 months
Annual yield: last 30 years
A yield value of 0 is shown when the inverter has not yet
1)
been installed at this time.

Yield period for Total yield (all yields since initial commis-
sioning)

Starting point of recording

Total yield with units
1)
1)
746.217 | 12.27