Steca StecaGrid 3000 Installations- Und Bedienungsanleitung Seite 78

EN
Calling up the service menu and editing the values
Notice
Risk of yield losses and contravention of regulations and standards.
Inverter and grid parameters can be changed in the service menu. The service menu must therefore
only be used by professional personnel who know the applicable regulations and standards.
76
1. Select the Service menu item.
2. Press SET. The fig. shown at the left appears.
3. Press  simultaneously for 3 seconds. The service
menu is displayed (Fig. left).
4. Press  to select a menu item.
5. Press SET to edit the menu item. The following applies:
Enter the password if required (Fig. left).
–
Press  within a menu item, if required, to display
–
and edit other settings (e.g. Voltage limits).
The menu items are described in Section
–
7.3.5, P. 58.
746.217 | 12.27