Operation; Setting The Operating Mode; Menu Overview; B) Operation With Static Colour Setting - Renkforce EL603 Bedienungsanleitung

11. Operation

a) Setting the Operating Mode
The effect light can be controlled with the integrated controller or with an external DMX controller. Additionally, it can
be used as a master device with integrated controller to control other connected effect lights synchronously in master-
slave mode, or as slave device via the controller of another effect light.
• The operating modes are set in the menu via the display and the function buttons UP (5), DOWN (4) and MODE (6).
• Press the MODE (6) button to select the individual menu items.
• Change the values to be set or options with the UP (5) or DOWN (4) buttons.
The display (7) switches off automatically after a few seconds without any button being pushed. Push any
button to reactivate it.

Menu Overview

For a more detailed explanation of the individual menu items from the table, see the following items of these
instructions.
Menu Item
Sxx
S2L
SLA
d
E x
Axx

b) Operation with Static Colour Setting

• Push the button MODE (6), until "Sxx" is displayed (7) ("xx" shows the chosen colour).
• Select the desired colour with the UP (5) and DOWN (4) buttons. There are 16 options available:
Display
S00
S01
S02
S03
S04
S05
S06
S07
28
Option
S00 - S15
1 - 512
E 1 - E 9
A00 - A33
Colour
Lights off
red
green
blue
yellow
purple
turquoise
green/yellow
Function
Static colours (16 settings)
Sound-to-Light Mode
Slave Mode
DMX-mode with setting of the DMX address
Effect operation with several effect lights
Automatic mode
Display
S08
S09
S10
S11
S12
S13
S14
S15
Colour
orange
navy
pale green
lavender
pink
gold
cold white
white