Operation; General Operation - Renkforce S1 Bedienungsanleitung

11. Operation

a) General operation
The effect light can be controlled with the integrated controller or with an external DMX controller. Ad-
ditionally, it can be used as a master device with integrated controller to control other connected effect
lights synchronously in master-slave operation, or as slave device via the controller of another effect light.
The settings are made in the menu via the display (1) and the function buttons MENU (3), DOWN (4), UP (5)
and ENTER (6).
• Push the button MENU (3) to enter the menu.
• Select the desired DMX start address with the buttons UP (5) or DOWN (4) and confirm your input with
the button ENTER (6).
• Select the desired DMX start address with the buttons UP (5) or DOWN (4) and confirm your input with
the button ENTER (6).
• To go back one level in the menu, push the button MENU (3).
After a short time without a button being pushed, the display will be switched off. It can be acti-
vated again at any time by pushing any button.
Menu Overview
Display Option
A001 A001-A512
CHMd 4CH / 12CH
SLMd MASt / SL 1
SHMd SH 1-SH 8
Soun oFF / on
PAn oFF / on
tIL oFF / on
dISP oFF / on
rFAC oFF / on
rSt
Explanation
DMX address setting
DMX operating mode
Operation in master or slave mode
8 Automatic programmes
Sound-to-light mode on/off
Reversal of the direction of rotation for PAN
Reversal of the direction of rotation for TILT
Reversal of the direction for display
Resetting to factory settings
Reset
31