Operation; A) Operating Mode Selection; Main Function - Renkforce TT-016B Bedienungsanleitung

Number

11. Operation

1
2

a) Operating mode selection

The LED spotlight can be operated using the built-in controller or an external DMX controller. In master/
3
slave operation, the device can be used as a master device using the built-in controller for synchronous
control of other LED spotlights connected in a daisy chain or as a slave device using the controller of
another LED spotlight. The DIP switches (5) can be used to make the settings on the menu.

4.2 Main Function

Red light RED light
High speed Speed
Slave mode
Slave mode
Address code
DMX input: For DMX512 link, use 3-pin XLR plug cable to input
DMX signal.
DMX output：For DMX512 link, use 3-pin XLR plug cable to
link the next unit.
Green light GREEN light
Colour change hop change
DMX
1/10 DMX address
Description
Blue light BLUE light
gradual change
Fader
The DIP switch position is indicated in
black.
Normal strobe light: DIP switch 5.
4A
Fast strobe light Speed strobe
1/8/9 sound control
Sound-to-light
29