Operation; Setting The Operating Mode - Renkforce 1435563 Bedienungsanleitung

10. Operation

a) Setting the Operating Mode
The effect light can be controlled with the integrated controller or with an external DMX controller. Additionally, it can
be used as a master device with integrated controller to control other connected effect lights synchronously in master-
slave mode, or as slave device via the controller of another effect light.
After switching on (putting the ON/OFF switch in the ON position), the light effect will perform a reset. Only
after this process is completed will the device be ready.
Use the display and buttons MENU and ENTER as well as the arrows to set the operating mode.
• Push the ENTER button to get to the menu selection for the individual menu items.
• Move through the menu using the arrows.
• Select menu items with the button ENTER and change the values or options to be set with the arrows.
• Confirm the selection with the ENTER button.
• To jump one level back in the menu or to call the last item selected again, push the button MENU.
Menu Overview
Menu Item Option
DMX Addr 001-512
CH Mode 9
15
Work Mod DMX
Auto
Sound
Master No
Yes
Pan Inve No
Yes
Tilt Inv No
Yes
Soud Sen 00-99
BK Light Off
Always
Reset No
Yes
Factory Set
28
Function
Setting the DMX starting address
9-channel DMX operation
15-channel DMX operation
DMX mode
Automatic mode
Sound-to-light mode
Device is in slave mode
Device is in master mode
Normal rotating direction
Rotating direction is inverted
Normal swivel direction
Swivel direction is inverted
Setting of the music sensitivity for sound-to-light operation
Automatic deactivation of the display
The display is permanently on
No reset
Performing a reset (after approx. 10 seconds)
Menu for service purposes (please do not make any changes)