Operation; Setting The Operating Mode - Renkforce DL-LED163 Bedienungsanleitung

11. Operation

a) Setting the Operating Mode
The following table shows the different operating modes. The desired operating mode is set via the DIP
switches (4) at the back of the device.
DIP switch > ON
2, 10
3, 10
1, 2, 10
1, 3, 10
2, 3, 4, 10
10
1, 10
4, 10
1, 4, 10
2, 3, 10
2, 4, 10
3, 4, 10
1, 2, 3, 10
1, 2, 4, 10
1, 2, 3, 4, 10
2, (5, 6, 7, 8), 9, 10
3, (5, 6, 7, 8), 9, 10
1, 2, (5, 6, 7, 8), 9, 10
1, 3, (5, 6, 7, 8), 9, 10
2, 3, 4, (5, 6, 7, 8), 9, 10
(5, 6, 7, 8), 9, 10
1, (5, 6, 7, 8), 9, 10
4, (5, 6, 7, 8), 9, 10
1, 4, (5, 6, 7, 8), 9, 10
2, 3, (5, 6, 7, 8), 9, 10
2, 4, (5, 6, 7, 8), 9, 10
3, 4, (5, 6, 7, 8), 9, 10
1, 2, 3, (5, 6, 7, 8), 9, 10
1, 2, 4, (5, 6, 7, 8), 9, 10
1, 2, 3, 4, (5, 6, 7, 8), 9, 10
---
9
1, 2, 3, 4, 5, 6, 7, 8, 9
The DIP switch 5, 6, 7, 8 define the programme speed in automatic mode.
Function
Sound-to-light mode red
Sound-to-light mode blue
Sound-to-light mode green
Sound-to-light mode white
Sound-to-light mode red/white
RGBW sound-to-light mode programme 1
RGBW sound-to-light mode programme 2
RGBW sound-to-light mode programme 3
RGBW sound-to-light mode programme 4
RGBW sound-to-light mode programme 5
RGBW sound-to-light mode programme 6
RGBW sound-to-light mode programme 7
RGBW sound-to-light mode programme 8
RGBW sound-to-light mode programme 9
RGBW sound-to-light mode programme 10
Automatic mode red
Automatic mode blue
Automatic mode green
Automatic mode white
Automatic mode red/white
RGBW automatic mode programme 1
RGBW automatic mode programme 2
RGBW automatic mode programme 3
RGBW automatic mode programme 4
RGBW automatic mode programme 5
RGBW automatic mode programme 6
RGBW automatic mode programme 7
RGBW automatic mode programme 8
RGBW automatic mode programme 9
RGBW automatic mode programme 10
Slave mode
Slave mode inverted
DMX operating mode (1-9 defines the DMX start address)
27