Memory Check; Memory Deletion; Low Battery Indicator - Spengler Neotens Neo300 Gebrauchsanweisung

UNIT OPERATION

Memory Check

When the unit is in steady state, you may check past test results by using the " " button. Upon
activating, test results can be scrolled through using the " " and " " buttons to browse stored
results. The LCD will display the last measurement stored in memory: e.g. measurement 01.
Note: In the event of a measurement data shown as "EEE", the product shall be return
for maintenance immediately.

Memory deletion

All memory may be deleted while in Memory Check mode. Press and hold " " for about 3 seconds to delete all memory
records for all patient groups. The LCD displays "

Low Battery Indicator

The unit will display E08 when battery life is depleting and unable to inflate cuff for
testing.
When" " flashes, it means the battery is lower than 25% and the cuff cannot be
inflated for measurement. The "
seconds prior to shutting off. Replace batteries at this time. Replace batteries at this
time. No memory loss will occur throughout this process.
50
USER MANUAL NEOTENS | WWW.SPENGLER.FR
" and beeps.
" appears simultaneously for approximately 5
Note: Memory cannot be recovered once it
has been deleted.