Unit Operation; Battery Installation - Spengler Neotens Neo300 Gebrauchsanweisung

UNIT OPERATION

Battery Installation

Slide battery cover off as indicated by arrow.
Install 4 new AA alkaline batteries according to polarity.
Close battery cover.
Note: The batteries shall not be replaced while
the PSU is connected.
Note: If the batteries inserted in the device
appear damaged or leak, the user shall take
precautions before touching them.
The USB Type-C port is located on the back of the monitor.
The Spengler NEOTENS (Ref 527 185) USB-Type C medical
®
adapter is highly recommended with the unit. Do not use other
types of adapters to avoid damaging the unit.
Note: Do not replace batteries while the unit is plugged into the mains. Power supply is specified as part of ME equipment.
44
USER MANUAL NEOTENS | WWW.SPENGLER.FR
USB C
Adapter Jack