Maintenance - Spengler Neotens Neo300 Gebrauchsanweisung

MAINTENANCE

1. Avoid dropping, slamming, or throwing the unit.
The user must ensure that the device is positioned on a stable
surface. In case the device drops, it may have sharp parts. In
case of breakage, the operator must discontinue using the
product and follow the instructions outlined in the "Disposal"
section.
3. When cleaning the unit, use a soft fabric and lightly
wipe with a mild detergent. Use a damp cloth to remove
dirt and excess detergent. During cleaning/disinfecting,
precautions shall be taken regarding connector and air
holes. Disinfection products may include WIP'ANIOS
EXCEL, SURFA'SAFE Premium, ANIOSPRAY QUICK,
ANIOSPRAY SURF 29. Use a soft cloth
to wipe. Only use recommended
cleaning and disinfecting products
and procedures.
56
USER MANUAL NEOTENS | WWW.SPENGLER.FR
2. Avoid extreme temperatures. Do not expose unit directly
under sunshine.
4. Cuff Cleaning: Do not soak cuff in water! Apply a small
amount of rubbing alcohol to a soft cloth to clean cuff's
surface. Use a damp cloth (water based) to wipe clean.
Allow cuff to dry naturally at room temperature. The cuff
must be cleaned and disinfected before use between
different users.
5. Do not use gasoline, diluents or similar solvents.