UNIT OPERATION
2. Result Display
When normally exiting the measurement state, the unit will emit two consecutive beeps. The screen will display measure-
ments for systolic and diastolic blood pressure, pulse value. When the value of PP (systolic pressure – diastolic pressure) is
greater than or equal to 60 mmHg, the PP value will be displayed on the LCD, the mmHg segment will be lit, and the PP icon
will blink.
Irregular Heartbeat Indicator
If the blood pressure monitor detects an irregular heart rhythm two or more times during the measurement process, the
irregular heart rhythm symbol "
as a rhythm that is 25% slower or faster than the average rhythm detected during measurement of systolic and diastolic blood
pressures. Consult your doctor if the Irregular Heartbeat Symbol "
Power Off
The "
" button can be pressed for more than 1 second to turn off the device in any mode. The device may turn itself off after
approximately 1 minute of inactivity in any mode.
Safety Precaution: If pressure in arm cuff becomes too extreme while testing, press the any one of " ", ", " ",
"
", " " buttons to stop inflation. Beeping sounds are emitted. The cuff pressure will rapidly dissipate once the
unit is off.
No PP value displayed
" appears on the screen with the measurement results. An irregular heart rhythm is defined
USER MANUAL NEOTENS | WWW.SPENGLER.FR
PP value displayed
" frequently appears with your test results.
EN
49