Memory Group Selection; Testing - Spengler Neotens Neo300 Gebrauchsanweisung

UNIT OPERATION

Memory Group Selection

When the unit is in steady state or displaying a measurement result, you can store the results in two different patient groups
by pressing the " " button, allowing you to switch between the two groups. Test results will automatically store in each
selected group.

Testing

When unit is in steady state or displaying measurement result, short press " " button for less than 1s to launch
measurement(s) according to the selected Patient. When entering the measurement state, the unit will emit 1 beep.
1. Testing
During cuff inflation, the air will slowly increase as indicated by the cuff pressure value.
When the pressure is greater than 15 mmHg, the cuff icon will be displayed.
Note: Keep relaxed while testing. Avoid speaking or moving body parts.
48
USER MANUAL NEOTENS | WWW.SPENGLER.FR