Memory Check - Spengler Neotens Nomad Neo100 Gebrauchsanweisung

Memory Check

When the unit is in steady state, you may check past test results by using the "
" button. Upon activating, test results can be scrolled through using the "
" buttons to browse stored results. The LCD below will display the last measurement
stored in memory: e.g. measurement 01.
r
Note: In the event of a measurement data shown as "EEE", the product
shall be return for maintenance immediately.
MANUEL UTILISATEUR NEOTENS NOMAD | WWW.SPENGLER.FR
EN
" and "
65