Quick Start - Spengler Neotens Neo300 Gebrauchsanweisung

QUICK START

1. Install batteries. (See Figure A, Figure B)
2. Insert cuff air plug into the left side of monitor unit. (See Figure C)
Figure A
3. Remove thick clothing from the arm area.
4. Rest for several minutes prior to testing. Sit down in a quiet place, preferably at a desk or table,
back supported, legs uncrossed and your feet flat on the floor. (See Figure D).
5. Apply cuff to your left arm and keep level with your heart. Bottom of cuff should be placed approximately 1-2cm (0.4-0.8'')
above elbow joint, with the tube placed downwards along the artery. (See Figures E, F & G)
Figure E
6. Press the " " button for at least 2 seconds and release the button to start the unit.
7. A quick press of the " " button to start the measurement.
Figure B Figure C
Figure F
USER MANUAL NEOTENS | WWW.SPENGLER.FR
EN
Figure D
Figure G
43